News

What's shipped in the rack lately.

Newest first. Everyone gets these the moment they land — no separate update to install.

Latest

November 4: Real electric bass sounds in Keys

Finger bass, Pick bass and Upright bass. The Keys tab’s Sound menu now has three bass sounds made from recordings of a real bass instead of a synthesizer. Finger bass is the closest to a Fender Precision or Jazz Bass sound; Pick bass is brighter with more attack; Upright is round and woody. They download once the first time you pick one, then keep working offline. Play them as a loop, or Bounce to Track like any other Keys sound.

Close Fretnook and reopen it once to pick up the update.

November 3: Harmonies for your vocals

Harmonies. Open a vocal track’s Vocal Editor, press Analyze, and scroll to the new Harmonies section. Fretnook guesses the key from what you sang (you can change it), then builds backing voices in that key: a third above or below, a fifth, or an octave. Preview them, then Add Harmony Tracks puts each voice on its own track right under yours, panned apart, with a little human drift in timing and pitch so they don’t sound like a copy.

Each voice keeps the singer’s natural tone instead of going chipmunk, and your original track is never changed. It works best on one clear voice at a time. One Ctrl+Z removes all the harmony tracks again.

Close Fretnook and reopen it once to pick up the update.

November 2: A built-in synth and piano roll, drag clips on the Timeline, Quick Groove and more

Keys: a built-in synth and piano roll. The new Keys tab under DAW lets you click notes onto a grid and play them with five built-in sounds: Bass, Keys, Pad, Pluck and Lead. Pick a Starter (a bass line, chords or an arpeggio in your key), press Play to loop it and jam along, then Bounce to Track to keep it as audio, ready for the mixer and effects.

Move clips on the Timeline. On the Timeline tab you can now click a clip and drag it left or right. Choose Snap (Beat, Bar or Off) and the clip’s start lands exactly on the beat or bar at your tempo, with faint lines showing the grid. Ctrl+Z puts a move back. On a phone, switch on “Move with touch” first so a swipe doesn’t scroll instead.

Quick Groove. On the Drums tab, tap a style (Rock, Funk, Blues shuffle, Reggae and more) and Fretnook loads the beat, sets a fitting tempo and starts playing, so you can jam along right away. Change the tempo any time. If you like it, Bounce to Track keeps it.

Reverse and Smooth Edges. Under each track’s waveform, Reverse plays a clip (or just the range you dragged) backwards, and Smooth Edges fades the ends of a clip by 10 ms so a cut doesn’t click. Undo Repair puts either one back.

Double Track. The new track now lands right below the original instead of at the bottom of the list.

Close Fretnook and reopen it once to pick up the update.

October 31: A steadier Tuner, Ear Trainer and fretboard

The note readout used to jump around, especially on a phone mic or a note sitting between two names. The pitch reader is now much more accurate in noisy conditions, and the display only changes when the pitch really changes. The needle, the note name and the fretboard stay put on a held note. It still follows a new note within about a tenth of a second.

Close Fretnook and reopen it once to pick up the update.

October 30: Easier Delay and Echo sliders, and a lighter Mixer

Delay and Echo sends. The send sliders used to do almost everything in the first few percent, so a tiny move could swamp the track. They now follow a smoother curve, so the whole slider is usable, from a faint trail to a big echo. The Feedback sliders also stop a little lower, so the repeats can no longer run away. Projects you saved earlier are converted and sound the same as before.

Lighter on phones. Each track used to run several background processors even when its Gate, Pitch, De-esser and Sidechain were all off. They now switch on only when you use them, which should mean fewer clicks and crackles on a phone. Timing between tracks does not change.

Close Fretnook and reopen it once to pick up the update.

October 30: Acoustic Sound Models you can actually hear

The first version of the acoustic Sound Models was too subtle, and the different guitar bodies sounded almost the same. Each model now has its own clear character. Dreadnought is big and boomy with a scooped midrange and sparkle on top. Jumbo has an even bigger low end and a mellower top. Fingerstyle (OM) is warm and defined in the mids. Parlor is thin on the bottom with a boxy, woody midrange. Nylon Classical is dark and round. Piezo to Mic adds body and removes pickup quack. Acoustic Bright and Acoustic Warm tilt the tone brighter or darker.

Loudness is matched between models, so switching changes the tone, not the volume. If a model is too strong for your take, pick Acoustic Base or Fingerstyle (OM), which are the lightest, or trim the track’s EQ.

Close Fretnook and reopen it once to pick up the update.

October 29: Acoustic guitar Sound Models, and a Feedback button

Sound Model, rebuilt around acoustic guitar. The Sound Model menu on each Mixer track now has acoustic voicings: Acoustic Base, Dreadnought, Jumbo, Fingerstyle (OM), Parlor, Nylon Classical, Piezo to Mic, Acoustic Bright and Acoustic Warm. Each one blends your take with a modeled guitar-body resonance, then shapes the tone. Start with Acoustic Base. They help most on a thin phone-mic, pickup or DI take; on a good close-mic’d take, a light touch is usually enough. There are also 12-String, Bass Round and Bass Punch. Off (Clean) is still the default and changes nothing. The old electric amp models are gone from the menu, but projects that used them still play back the same.

Feedback. There is a new Feedback button at the top of the app, next to Help. Send an idea, a bug report or just a comment, and add your email if you would like a reply. I read every message.

Close Fretnook and reopen it once to pick up the update.

October 19: Echo and Double Track for a bigger sound

Echo. The Mixer has a new Echo column next to Verb and Delay, so each track can send as much or as little as you like. Set the Echo Time in milliseconds, how many Repeats it gives, and the Tone, which makes every repeat a little darker, like a tape echo. A short time with one repeat gives you a classic slapback.

Double Track. On the Recorder tab, Double Track copies a track, with its settings, onto a new one and pans it the other way. The new track starts 20 ms late; the new Timing column in the Mixer then moves any track earlier or later by up to 80 ms, without touching the recording. A copy a few milliseconds off sounds like a second player and makes the part wider and bigger.

Mixer headers stay put (October 20). The column names (Low, Mid, Verb, Echo and so on) now stay pinned at the top while you scroll down through your tracks, so you always see what each slider is. On a touch screen you can also drag your finger sideways anywhere in the Mixer to reach the controls on the right, and the sliders have bigger handles. Grab a slider by its handle to change it; touch anywhere else on a slider to scroll.

Smarter Auto level (October 20). Auto level now has you stay quiet for a moment, strum your loudest chord, then your softest. It sets the input gain so the loud chord has headroom, and tells you how your soft playing compares with the background noise.

Cleaner recordings (October 20). The noise gate and de-esser were rebuilt with proper timing, so they no longer add a crackly edge to note tails. Double Track now starts 3 dB quieter, so stacked doubles don’t overload the mix. After each take, the Last take line now also warns if the recording clipped and tells you how far the signal sits above the background noise.

Close Fretnook and reopen it once to pick up the update.

October 18: better amp tones, drums and bass, a New Song button, and iPhone fixes

Amp sounds rebuilt. The Sound Model amps now use smoother, tube-style distortion instead of the old harsh clipping, a tighter low end before the drive, and a more realistic speaker-cabinet roll-off, so distorted tones sound less fizzy and more like an amp in a room. The same change applies to Monitor, so you hear it while you play. Four new amps join the list: Blues Breakup, Classic Rock, High Gain and Jazz Clean. Volume now stays much steadier as you add drive. Projects that use distortion will sound a little different, usually smoother.

A better drum machine. The kick, snare, hats and clap were rebuilt: a kick with a real beater and shell, a snare with a tuned body and wire rattle, metallic hi-hats made the way classic drum machines make them, and a layered clap. A new Beat menu loads eight ready-made patterns (Rock, Pop, Funk, Hip-hop, Blues shuffle, Disco, Reggae and Hard rock), and a new Feel control adds swing from Straight to full Shuffle. The Band tab uses the same new drum sounds.

A real-sounding bass. The drum machine’s bass and the Band tab’s Synth bass now use a plucked-string model with finger attack and a full low end, instead of a buzzy synth tone.

New Song. The Recorder has a New Song button next to Save Project. It clears every track, take, loop and video take for a blank song and keeps your tempo and settings. If the current song has anything in it, it asks first, so save before you tap it. It jumps straight down to Track 1 so you can start recording.

Share your recordings. After you export a mix or video there is now a Share to Community panel right under the export buttons: add a title and send it to the Fretnook team in one tap, no downloading and re-uploading. The Upload page now takes a dragged-in file too (audio up to 20 MB, video up to 60 MB), and the old paste-a-link option is still there. Songs and projects can now come in from Google Drive too: in Load Song and Load Project press From Drive and paste a share link (set to “Anyone with the link”), and the Upload page has the same option. There are two new one-tap buttons next to Save Project: Send to other device gives you a short code to type on your PC or phone and the project appears there (the copy is deleted after 24 hours), and Share to Community makes a small audio file of your mix and sends it to the review queue without any exporting or file handling. On a computer, Fretnook folder lets you pick a folder once, and after that every save and export goes straight into it and Load Project opens there. Also fixed: the “Unsaved work found” message no longer appears when everything has been saved. Only the Fretnook team can listen to what you send, and the best ones get featured on the Community page, where real recordings now play right on the page.

iPhone and iPad. Saving used to say “Saved” even when the file went somewhere you couldn’t find it. Every save now opens the iPhone share sheet, so you can choose Save to Files and then find it in the Files app. If you close the sheet by mistake, a button appears to try again. Recording is also steadier: Fretnook wakes the phone’s audio before recording or playing, and tells you plainly if the phone pauses it mid-take. I could not test that last part on a real iPhone, so if a new track still sticks or multitrack playback goes quiet, switch Listen off and on and let me know.

Smaller fixes. The “new version ready” bar is cleaner on small screens, and the Install Fretnook dialog now shows the right steps for your browser.

Close Fretnook and reopen it once to pick up the update.

Find a lesson or the chords for any song, in one click

The Songs tab now has two shortcuts next to the song name: Find a Lesson opens a YouTube search for a lesson on whatever you've loaded, and Chords on Chords.wiki opens Chords.wiki's search so you can look up the chord chart. Both open in a new tab — nothing leaves your device, nothing is uploaded.

Fretnook v1.0: a complete pro recording suite

The new Band tab is an AI backing band. Record your guitar and press Listen & Suggest: Fretnook works out the tempo, key and chords of your take, then plays drums, bass, keys and a horn section to match, in styles from rock and blues to funk and reggae. Preview it with your track and bounce each part to its own track. The piano, bass and horn sounds are real instrument samples that download once and then work offline.

Recording got better too: record from an iPhone or a laptop, start and stop any track from its own buttons, quiet takes boost themselves, and the amp models are now called Sound Models, with live monitoring and tighter timing. The installed app now updates itself when a new version is out. Find the band under DAW › Band.

New: Video — turn your mix into a music video

Film yourself playing right inside the DAW. Record a take with your camera, or hit Film to Mix to play along with the finished song. Every take lines itself up with your audio automatically, so you can cut between takes without drifting out of sync. Export an MP4 with your mastered mix as the soundtrack, ready for YouTube, Instagram or TikTok. Find it under DAW › Video.

Free sign-up unlocks the full studio

The Ear Trainer and Tuner stay open to everyone. The DAW, Songs and MIDI & Gear unlock with a free email sign-up, which helps us count users and plan for growth. No payment, and your saved projects and settings are untouched.

Songs, Vocal Editor, USB Gear & New Tunings

Load a song to loop, slow down and transpose, with key, tuning and chord detection. Retune vocals note by note, snap to a key, and clean up noise and breaths. Plug in USB interfaces and effects pedals, map MIDI footswitches, and train in Drop D, Whole Step Down, and Open G / D / E.

Live-Set Tools: Footswitch, Setlists & Wake Lock

Keys 1–4 now fire the four loop pedals and Space starts/stops the drum machine — footswitch-friendly, since most USB/Bluetooth pedals just send keystrokes. A Setlist bar recalls tempo, key, drum pattern, and every mixer level per song, and the screen won't sleep mid-set.

4-Slot Live Looper + Non-Destructive Clip Editing

Boss RC-pedal-style looping: record, overdub with seamless hand-offs, and bounce any loop to a track. Recorder clips now support trim, cut, duplicate, and move — all reversible, none of it touches your original take.

Mastering Suite Upgrade

Adjustable master compressor plus a separate brickwall limiter with clip LED, per-track compression & noise gate, Room/Plate/Hall reverb, a tempo-synced delay bus, and per-track fades & reordering. Exports auto-normalize toward a share-ready level.

Unlimited Tracks & Stem Export

The Recorder grew from a fixed 8 tracks to an open-ended Add Track / Remove Track setup (up to 24), and Export Stems now bounces every audible track to its own WAV, zipped in one download.

Automation & More Effects

Draw level, pan, and send curves directly on a track's timeline. New per-track distortion/overdrive and chorus round out the effects chain alongside EQ, comp, and gate.

Installable, Offline-Capable App

Fretnook now installs as a real app with a service worker — open it with zero internet after the first load. Built for practicing or playing at a venue with bad wifi.

Drum Machine, Recorder & Mixer Land

The original real-time Ear Trainer grew into a full rack: a 6-voice 16-step drum machine tuned for a rock/blues feel, an 8+ track Recorder with punch-in and waveform editing, and a Mixer with EQ, sends, and WAV export.

Support
Fretnook is free, always — a quick email sign-up unlocks the full suite. If it's useful to you, chip in a few bucks or check out the gear we recommend.